Installing HoTMetaL PRO 5.0 Evaluation Version ********************************************** Welcome to HoTMetaL PRO 5.0 Evaluation Version. This is a 'time-bombed' version that will stop working 30 days from the day you installed it. We advise against resetting your PC's system clock during the evaluation period. The clock may be set back by small amounts of time to allow for switching between Standard Time and Daylight Time. Setting the clock back longer amounts of time will cause HoTMetaL PRO 5.0 Evaluation Version to stop working. If you set your clock ahead, the software will not stop working automatically, but this will of course shorten your evaluation period. Once the 30-day evaluation period has expired, the software cannot be re-installed and used again. This document has information on: - System requirements - Installing HoTMetaL PRO - Uninstalling and re-installing HoTMetaL PRO - Possible installation problems (The file "install.htm" contains an HTML version of this document.) After you have installed HoTMetaL PRO, see the file "readme.wri" and the HoTMetaL PRO online help for more product information. You can also consult SoftQuad's online Support Center, available from http://www.softquad.com/supportcenter System requirements =================== HoTMetaL PRO 5.0 Evaluation Version runs on Windows 95, 98, and NT 4.0. Your system must have the following, or higher: * Pentium processor (Pentium 100 MHz or above recommended) * 16 MB of available RAM (32 MB RAM or more recommended) * Super VGA display, 256 colors, 640 x 480 resolution * 26 MB of disk space * 40 MB extra disk space during installation * On Windows NT 4.0, Service Pack 3 must be applied before you install and use HoTMetaL PRO 5.0. Installing HoTMetaL PRO 5.0 Evaluation Version ============================================== There were two options for downloading the HoTMetaL files over the Web. The steps for installing the product are different for each option. Option 1: If you downloaded the product in one piece, then the file "hm5ev.exe" should be present on your system. Option 2: If you downloaded the product in three pieces, then the files "hm5ev_1.exe", "hm5ev_2.exe", and "hm5ev_3.exe" should be present on your system. You will need approximately 65 MB of free disk space in order to install HoTMetaL PRO 5.0 Evaluation Version. Approximately 40 MB of this will become free again after the install has completed. The HoTMetaL PRO 5.0 Evaluation Version software occupies approximately 26 MB of disk space. If you chose Option 1 --------------------- 1. Double click on "hm5ev.exe". This will extract the HoTMetaL PRO files from the archive that you downloaded, and will start the HoTMetaL installer. 2. Follow the instructions given by the installer. Note: The default installation folder is HoTMetaL PRO 5 Eval. If you already have HoTMetaL PRO 4.0, or any earlier version of HoTMetaL, on your PC, *do not* install HoTMetaL PRO 5.0 Evaluation version in the same folder as any of these products. 3. Make sure that HoTMetaL PRO can be launched successfully. 4. You can now delete the file "hm5ev.exe". If you chose Option 2 --------------------- If you downloaded three files, carry out the following steps: 1. Double-click on "hm5ev_1.exe". This will extract part 1 of the HoTMetaL PRO files from the archive that you downloaded. During this process, you will be asked to enter the Installation Directory (folder) into which the files should be extracted. This is a temporary folder that you will delete when the installation is complete. 2. After all files in part 1 have been extracted, part 2 (hm5ev_2.exe) will be run automatically, then part 3 (hm5ev_3.exe). Make sure to specify the *same* installation folder each time. You will get an error if: - you have not downloaded all 3 files to begin with (hm5ev_1.exe, hm5ev_2.exe, hm5ev_3.exe) - you did not start by extracting part 1 (hm5ev_1.exe). You can easily correct this by downloading any missing files. Then start by extracting part 1 again (say "yes to all" to overwrite files that you extracted the first time). 3. After you have extracted all three parts into the installation folder, go to the installation folder and double-click on "Setup.exe" to install. 4. Follow the instructions given by the installer. Note: The default installation folder is HoTMetaL PRO 5 Eval. If you already have HoTMetaL PRO 4.0, or any earlier version of HoTMetaL, on your PC, *do not* install HoTMetaL PRO 5.0 Evaluation version in the same folder as any of these products. 5. Make sure that HoTMetaL PRO can be launched successfully. 6. You can now delete the files "hm5ev_1.exe", "hm5ev_2.exe", and "hm5ev_3.exe", and the temporary installation folder and all the files and folders that it contains. Uninstalling and re-installing =============================== To uninstall HoTMetaL PRO 5.0 Evaluation Version: 1. From the Windows Start menu, choose Settings, and then Control Panel. 2. Double-click on Add/Remove Programs. 3. Choose SoftQuad HoTMetaL PRO 5.0 Evaluation from the list. 4. Click on Add/Remove. 5. To re-install, follow the installation instructions again. Possible installation problems ============================== Anti-virus programs can interfere with installation --------------------------------------------------- Anti-virus programs sometimes interfere with the installation process, causing the installer to hang, usually within a short time after it starts up. If you encounter this problem, and you have any type of anti-virus program installed on your PC, disable it while you are installing HoTMetaL PRO. Installer sometimes fails to register DLLs and OCXs --------------------------------------------------- If the HoTMetaL installer gives you an error message indicating that it did not register the required DLL and OCX files, you can complete this step by running a script, as explained here: - Choose MS-DOS Prompt from the Programs menu - Change directory to the system folder (usually C:\windows\system) - Run the script by typing 'fixocx.bat' (no quotes) at the MS-DOS prompt - If any errors occur, open the script file with a text editor, identify the lines that caused the errors (just look for the OCX or DLL name that appeared in the error message), and enter each of those lines individually at the MS-DOS prompt. Microsoft Internet Explorer 4.0 and Active Desktop ================================================== HoTMetaL PRO 5.0 uses Internet Explorer components in its implementation of the following features: the Asset tab in the Resource Manager, WYSIWYG-Frames view, Page Preview, Site Maker preview, and macros. Additionally, the Thumbnail View and the Open dialog preview window require that Microsoft Active Desktop be installed. HoTMetaL PRO 5.0 will still operate on Windows 95 and NT 4.0 if Internet Explorer and Active Desktop are not installed, but these features will be unavailable. On Windows 98, these features will always be available. For best results, you should have Internet Explorer version 4.70.3110.8 or later installed on your PC; if you use an older version, some of the features listed above may not work correctly. To obtain Internet Explorer, go to Microsoft's site at http://www.microsoft.com/ and download the latest version of Internet Explorer 4.0. Internet Explorer is language-specific; if you are using a non-English version of Windows, make sure that you download the version (plus service pack if required) that applies to your system. Updates to MSIE --------------- Microsoft regularly provides updates to their software. We strongly recommend that you visit http://www.microsoft.com to get any patches or updates to Microsoft Internet Explorer. Copyright 1998 SoftQuad Inc. @(#)install.txt 1.3 98/11/03